coronabus
NUTTIER than a fruitcake
NUTS Member
What Happens In The Bus...
Posts: 191
|
Post by coronabus on Dec 11, 2006 17:15:02 GMT -5
I bought the Wolfsburg door seal kit a while back. They are the light grey medium density type, very good quality. Some of them have begun coming off especially engine compartment and lift gate. These did not come with one side PSA, they are a friction fit. What would you guys recommend to stick these guys down? I don't want anything messy like silicone and nothing too aggressive. I was gonna use spray adhesive but I'm concerned about over spray. What else is out there?
|
|
|
Post by Shan Simpson on Dec 11, 2006 18:40:55 GMT -5
DOUBLE BUBBLE.....WORKS GREAT ON MY BUS ;D
|
|
spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Dec 11, 2006 19:12:51 GMT -5
Im not to sure but what about two way tape! if it don't work it will remove easy with some orange cleaner
cheers SPICE
|
|
|
Post by commercialair on Dec 11, 2006 19:23:24 GMT -5
Both 3M and Wurth make seal adhesive. It does exactly what it's meant to do. Watch out for the fumes though.... Could leave you dancing like our friend here.
|
|
|
Post by Milkman on Dec 11, 2006 19:45:51 GMT -5
I like to use the Worth clear weatherstrip adhesive. Goes on easy & you can't see it at all. I think the only problem would be trying to clean it off someday if you ever need to.
|
|
|
Post by dpeters81westy on Dec 11, 2006 20:10:52 GMT -5
I was going to recommend the 3M weatherstrip adhesive to you...but the clear stuff sounds like it might be easier to clean up than the 3M stuff...which is Black. (works very good though)
- DP
|
|
coronabus
NUTTIER than a fruitcake
NUTS Member
What Happens In The Bus...
Posts: 191
|
Post by coronabus on Dec 12, 2006 9:27:57 GMT -5
Ya the stuff that was holding previous seals was black and an absolute puta to take off! This Wurth stuff available anywhere?
|
|
|
Post by Milkman on Dec 12, 2006 10:41:09 GMT -5
We get ours here at work directly from the supplier. I think anyone that carries Worth products should be able to get it. The part number is: #10192 Stock number: #WS-C. If you can't find any I could probably get another tube & mail it out to you.
|
|
coronabus
NUTTIER than a fruitcake
NUTS Member
What Happens In The Bus...
Posts: 191
|
Post by coronabus on Dec 12, 2006 14:45:00 GMT -5
Sweet! That'll save me battling the x-mas shoppers trying to find it. Let me know what you want and how I can get it to you Thanks!
|
|
|
Post by Milkman on Dec 12, 2006 15:25:35 GMT -5
Just PM me your address & I will try to get another tube & send it your way as soon as I can.
|
|
coronabus
NUTTIER than a fruitcake
NUTS Member
What Happens In The Bus...
Posts: 191
|
Post by coronabus on Dec 19, 2006 10:56:14 GMT -5
Hey Greg, received the adhesive today, thanks so much. If there something you ever need, just let me know. You've been karmanized! ;D
|
|
|
Post by Milkman on Dec 19, 2006 14:09:46 GMT -5
Thanks for the Christmas Karma! Let me know just how well it works for your Bus weatherstrips. I've always been a fan of the Wurth products. They make a killer seam sealer too!
|
|