|
Post by Mowser on Apr 17, 2007 1:37:27 GMT -5
So the bus is all but ready for it's date with the Inspector when I finally get around to trying the wiper motor out. First I find the switch to be completely seized. Then I go to remove the wiper assembly to see how bad the one wiper shaft is (the other one is broken already) only to find that the assembly is broken off at one of the shafts.
Now I find myself looking into my parts bits and low and behold the complete assembly I had I gave to a friend last spring. I'm up a creek now.
What I need is: (1) 6 pin wiper switch ('66,'67 ish) (2) wiper assembly (I'm looking at replacing mine with a earlier (65 or earlier) assembly so I can use the nicer safari pivots. (3) any other parts that might make this function.
condition of the motor is not important Anyone?
|
|
|
Post by commercialair on Apr 17, 2007 17:47:59 GMT -5
Mowser,send me your address. I dug up the parts that you need.
Chris
|
|
|
Post by Mowser on Apr 17, 2007 19:04:25 GMT -5
Dude you are the MAN! I'll pm ya shortly.
|
|
|
Post by commercialair on Apr 17, 2007 19:22:12 GMT -5
The 6 pin switch that I have is junk. It fell apart in my hands. Just checked and I have a 4 pin switch but no other 6 pins. I have an early wiper motor, arms, and pivots for you though. Looks like it still has the rubber washers and screws too. Chris
|
|
|
Post by Mowser on Apr 17, 2007 20:33:58 GMT -5
You're still the Man. Pm'in ya now. Bananas for you and some good karma too.
|
|
|
Post by commercialair on Apr 18, 2007 19:04:12 GMT -5
Todd, wiper parts are headin' your way. You may even see the Purolator guy by the end of the week! Chris
|
|
|
Post by Mowser on Apr 18, 2007 19:28:56 GMT -5
|
|
|
Post by Mowser on Apr 20, 2007 22:34:38 GMT -5
I got PARTS.... Thanks again Chris, I'm gonna go see what I have to modify to get them in tomorrow. Woo Hoo ;D
|
|
|
Post by commercialair on Apr 20, 2007 22:49:57 GMT -5
|
|