|
Post by riffraff on Mar 23, 2007 12:31:47 GMT -5
Hey Boys
I have been piecing together my tin requirements for the 2007, the 1776 and the 1600 and I find myself needing a few pieces and related items. Anyone can help me out with this would be very cool.
Dual Port Breast tin - one drivers side (Cylinders 3&4) and two passenger side (1&2) One doghouse front tin (front is front) Two pieces (both sides) of the under cylinder tin (the pieces that bolt to the heater boxes to duct the warm air to the back) Two thermostat rods Two thermostats Two thermostat flap connecting rods (doghouse style)
Any help in scaring this stuff up will be muchos appreciated.
|
|
|
Post by bullyboy on Mar 23, 2007 12:48:59 GMT -5
I have an OG 1&2 side cyl tin I'll send ya Its not perfect but you have the tools to make it so. I found myself bashing, grinding, and "adjusting" the OG ones for my 2110 to get a proper seal against the case anyways.
|
|
|
Post by davejohansen on Mar 23, 2007 23:10:35 GMT -5
Keith
I'm going to be in Calgary tomorrow 24th, so Mark sent the cooling tin with me. Brothers birthday party happening close to you so I can drop it off.
Dave
|
|
|
Post by riffraff on Mar 24, 2007 8:12:39 GMT -5
Excellent! Now that's service. I will be out from about 10 AM till noon, but apart from that I should be around. If I'm not here, the garage will be open. Karma for both of you ;D
|
|
|
Post by davejohansen on Mar 24, 2007 8:14:21 GMT -5
We aim to please.... ;D
|
|