spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Feb 11, 2007 15:35:25 GMT -5
OK over the yrs somehow I lost the rear tranny mount 091 trans >>2.0L motor do they make a repro of this part ?? help I have the motor hanging in the engine bay trying to get it back in thanks SPICE
|
|
|
Post by Mowser on Feb 11, 2007 19:04:26 GMT -5
You're a long ways away but if needed I have you for you. It came out of a '79. I believe I have one from a '71 as well but would have to check.
|
|
spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Feb 11, 2007 19:26:49 GMT -5
You're a long ways away but if needed I have you for you. It came out of a '79. I believe I have one from a '71 as well but would have to check. just to be sure !! this is the block that holds the noise of the tranny , these tranny's have the two fingers that stick out and this "block" holds them to the axle from the bottom?? with 2 bolts if this is what you have I'll take it can you take a pic ?? thanks SPICE
|
|
|
Post by Mowser on Feb 11, 2007 19:44:35 GMT -5
Not the part I was thinking of. I'll go check right now to see if that is one of the pieces I held onto.
|
|
|
Post by Mowser on Feb 11, 2007 19:51:07 GMT -5
Sorry dude, looks like I gave it to the guy that bought the tranny. I'd bet dollars to doughnuts he has a couple though. Want me to ask him?
|
|
spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Feb 11, 2007 19:51:09 GMT -5
Not the part I was thinking of. I'll go check right now to see if that is one of the pieces I held onto. thanks I'm about ready to pull out my hair !! yes could you ask him please cheers
|
|
|
Post by hotvw1 on Feb 11, 2007 20:44:14 GMT -5
I think I might have one off that trans I pulled from the 73. I will check and take pics.
|
|
spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Feb 11, 2007 20:46:52 GMT -5
this is my tranny and the fingers like mount that I need to hold up on the axle but I'm missing the other piece to hold it up it would have a grove for the fingers to sit in and it will have 2 holes to bolt it to the axle its the ones circled in yellow Thanks Hotvw1 cheers SPICE
|
|
spice
NUTTIER than a fruitcake
air cooled only
Posts: 109
|
Post by spice on Feb 13, 2007 13:33:46 GMT -5
OK I found one only took a few days , was freaking out for a bit !! not to do adds for someone but he came through for me !! www.bradsbeetlemania.com/index2.htmlso I have decided to make a few of these parts!! I have a buddy that owns a CNC shop , when the part comes in I'll blue print it and get 25 made up for safe keeping!! I don't know why they don't have after market ones but I'll take care of that!! thanks to all!! cheers SPICE
|
|
|
Post by hotvw1 on Feb 20, 2007 23:38:35 GMT -5
Hey spice I need an address to send it . PM me thx.
|
|