|
Post by bluejay on Jul 10, 2007 2:31:04 GMT -5
Hi Chris I need a front floor section for my 55 panel. ;D Let me know if you have them, or if one needs to be ordered. They only make one style, not separate left and right ones? As well I need front & rear bumper brackets I’m a little confused about the bumper brackets listed on the Klassic Fab page. They have bumper brackets listed for pressed bumpers but than they say “correct front and rear BD bumper mounts, we do not make post, pressed bumper mounts” So are they saying they don’t make brackets for bumpers that aren’t pressed bumpers or are they saying they only make brackets for Barn Door buses? Then with my 55(Wolfsburg built), which ones would I need, I think I read some where mine should have the same pressed bumpers that where used on barn doors? Cheers Jay
|
|
|
Post by commercialair on Jul 10, 2007 14:30:14 GMT -5
So are they saying they don’t make brackets for bumpers that aren’t pressed bumpers or are they saying they only make brackets for Barn Door buses? Jay, There are both driver and passenger floor corners. I have them in stock and the stampings are nice and crisp. What the website is trying to say is that they only make pressed bumper brackets. These are all the same until '59. I don't have any in stock, but have put some on hold for my next stock shipment if you need them. Front floor outer panels: $96.25 each side Front bumper brackets $79.00 a set I'll have to check availability and price of rears. Chris
|
|
|
Post by commercialair on Jul 10, 2007 14:32:04 GMT -5
OK, rears are available in the next 2 weeks.
$175.00 a set. Gerson is running a custom batch for the UK now and we can add to the order for Canada.
Chris
|
|
|
Post by bluejay on Jul 11, 2007 11:49:44 GMT -5
Ok cool.
I will pick up the floor sections when I’m in town for the Regina show.
And if you could order me front and rear bumper brackets that would be fantastic.
Cheers
Jay
|
|
ken
NUTTIER than a fruitcake
NUTS Member
Posts: 182
|
Post by ken on Jul 11, 2007 12:34:47 GMT -5
I'm not sure if I'm reading this right so forgive me if I'm adding confusion to this situation....
The rear bumper brackets are the same for all pressed bumpers.
The front are different for Barndoor and post 55. The Barndoor ones look like a -67 beetle (straight) and the later ones have an offset to them (like a kick-up at the end)
|
|
|
Post by bluejay on Jul 11, 2007 12:52:58 GMT -5
I'm not sure if I'm reading this right so forgive me if I'm adding confusion to this situation.... Just a little more confusion, nothing we can’t handle though. So for my bus, the fronts should be the same as barn door?
|
|
|
Post by commercialair on Jul 11, 2007 13:02:50 GMT -5
Sorry, I think I added to that as well. Fronts: BD are BD only (straight) Post BD '55-'59 are the same (offset) Available at $79.00/set Rears: All the same for pressed bumpers Available at $175.00/set Jay, I'll add them to the order. Chris
|
|
|
Post by bluejay on Jul 11, 2007 16:37:56 GMT -5
Thanks! ;D
|
|
|
Post by davejohansen on Jul 21, 2007 16:15:20 GMT -5
Hey Chris
It looks like I'm going to need pretty much a whole right side floor panel. Hopefully I can salvage enough to patch the left side as it's only about a 6"x6" area. Let me know when you have them in stock.
Dave
|
|
|
Post by davejohansen on Aug 15, 2007 15:17:12 GMT -5
Hey Chris
Did you get any of the floor panels in yet? ;D
Dave
|
|
|
Post by commercialair on Aug 23, 2007 9:29:52 GMT -5
Dave, sorry I missed your post. Yes, your cargo floor repair section arrives this week. I'll be posting all the panels available when they get here. Just a note, most of this order is already spoken for but the next order will be here soon.
Jay, your bumper brackets should be here as well.
Chris
|
|
kombi
Slightly NUTS
Posts: 8
|
Post by kombi on Oct 11, 2007 11:42:10 GMT -5
Not sure that you got my email, I'll be needing some panels for a 59 single cab. Let me know what you've got left in the last shipment, and what I can order for your next shipment. I'll be needing outriggers, jack supports and rockers ASAP , I can wait for the floors and bed Cheers Dave kombi@airriders.ca
|
|
|
Post by commercialair on Oct 11, 2007 13:08:10 GMT -5
e-mail sent
|
|
|
Post by dcuplover on Jan 10, 2008 23:31:51 GMT -5
I am going to need a complete floor for a 65 single cab. I aminterested in a new tailgate as well. I believe I could use a rocker (may be leftside I would have to check). Thanks Alp
|
|
|
Post by rareair on Jan 11, 2008 13:49:03 GMT -5
Hey Alp, glad you found our little corner of the T2 internet. Chris is no longer selling Gerson panel's. You have someone much closer to you that's a distributor. I believe the old bug shop (or something like that) is now selling his stuff.... they are in Langely IIRC.
|
|